Before Using; Dehumidifying Operation; Cooling Operation - Elnur Gabarron BERING 12000 Instructions D'installation Et Guide D'utilisation

6.1. Before using

Notice:
- Operation temperature range:
DB/WB(ºC)
Check up whether the exhaust hose has been mounted properly.
Cautions for cooling and dehumidifying operations:
– When using functions on cooling and dehumidifying, keep an interval of at least 3 minu-
tes between each ON/OFF.
– Power supply meets the requirements.
– The socket is for AC use.
– Do not share one socket with other appliances.
– Power supply is AC220 - 240 V, 50Hz

6.2 Dehumidifying operation

Press the "Mode" button till the "Dehumidify" icon appears .
– Automatically set the selected temperature to current room temperature minus 2ºC.
(16ºC-31ºC)
– Automatically set the fan motor to LOW wind speed.

6.3 Cooling operation

Press the "Mode" button till the "Cool" icon appears.
– Press the " DOWN "or" UP "button to select a desired room temperature. (16ºC-31ºC)
– Press the " WIND " button to select wind speed.
6.4 Fan operation
– Press the "Mode" button till the "Fan" icon appears.
– Press the " WIND" button to select wind speed.
6.5 Timer operation
Timer ON setting:
– When the air-conditioner is OFF, press the "Timer" button and select a desired ON time
through the temperature and time setting buttons.
Maximum cooling
35/24
Minimum cooling
18/12