General Guidelines - Velleman VTSS7 Mode D'emploi

 Let a hot soldering iron cool down naturally and do not immerse in water.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages
of this manual.
 Protect this device from shocks and abuse. Avoid brute force when
operating the device.
 Keep this device away from rain, moisture, splashing and dripping
liquids.
 Familiarise yourself with the functions of the device before actually
using it.
 All modifications of the device are forbidden for safety reasons. Damage
caused by user modifications to the device is not covered by the
warranty.
 Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
 Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
 Nor Velleman nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial,
physical...) arising from the possession, use or failure of this product.
4. Features
 manual temperature setting
 power-on LED indication
 on-off switch
 spare bits: BITC7N1 (0.5 mm), BITC7N2 (1.5 mm), BITC7N3 (3 mm)
5. Overview
Refer to the illustrations on page 2 of this manual.
1 on-off switch
2 temperature setting
3 holder
6. Operation
1. Carefully unpack the soldering station [5] and check all parts. Do not
use if the soldering station or any other part is visibly damaged.
2. Mount the iron holder [3] onto the station and put the soldering
iron [6] in its holder. Lightly moisten the sponge [4] with some tap
water.
V. 02 – 17/11/2014
VTSS7
4 sponge
5 soldering station
6 soldering iron
5 ©Velleman nv