Cleaning And Maintenance - Panini Grill PREMIUM Notice D'installation Et D'utilisation Succincte

Temperature setting
Set the temperature by positioning the thermostat (n°4 on picture) to the desired
temperature. The orange pilot light (n°3 on picture) switches on if a higher level of
temperature is required and switches off when the same is reached.
It is not necessary to leave the device switched on at full power. It is necessary
to adapt the temperature to products to be cooked to limit the energy consump-
tion.
If your food sticks on the plate, reduce the temperature of the thermostat
Stopping the appliance
Set each control knob (n°4 and 6 on picture) on 0: the appliance is no longer
functioning.
Let the device cool
Disconnect the power cable.
Clean the appliance. (see 6. Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him the
complete reference of your device (commercial name, type and serial number). This
information appears on the visible descriptive plate behind the device.

6. CLEANING AND MAINTENANCE

Disconnect the device.
- Let cool completely the device before any technical intervention or cleaning.
- For cleaning of plates, only use non-abrasive products, clean regularly the external
walls of your device with warm water and wash liquid: avoid the abrasive towelling.
Rinse your device with a wet sponge.
- Never clean the device under a water jet, the infiltrations would risk to damage it in a
irreparable way.
- Never immerse the device, the cord or the plug in the water or quite other liquid to
avoid any electric shock.
- During a prolonged non-use, we recommend you strongly to keep the device shield-
ed from the humidity.
- The drip tray can be washed in a machine
15