Parts List; Before The First Use - Tristar KB-7441 Mode D'emploi

Instruction manual

PaRTS lIST

1. Temperature switch
2. Rack
3. Adjustable foot
1

BeFoRe The FIRST uSe

• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all removable
parts with a damp cloth. Never use abrasive products.
• Put the power cable into the socket. (Note: Make sure the voltage which
is indicated on the device matches the local voltage before connecting
the device. Voltage 220V-240V 50/60Hz)
4
2
3
FIRST uSe
• Place the appliance on a flat stable surface in a well ventilated area and
keep at least 10 cm. free space around it. Make sure the unit is placed
right. With the adjustable foot (No. 3) the device can be leveled.
• After transport, wait at least 4 hours before plugging into the wall
outlet. Avoid that appliance is getting wet.
• Make sure the power cable to the power plug is not curled up on the back
of the device, it can be too hot. Place the plug always a grounded outlet.
• The freezer should be far away from any heat source or direct sunshine.
DooR ReVeRSal INSTRuCTIoNS
• Your freezer is built with a reversible door. You have the choice of either
opening it from the left or the right side. In order to reverse the opening
direction of your door, please follow these simple instructions.