Cleaning And Maintenance - HAEGER HP-02S.015A Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating Instructions
Make sure that the appliance is in the "MIN" position and then plug it into the mains.
Use flat based pots/pans to ensure full contact with the hot plate. The base diameter should be at least equal to the
cooking plate.
The hot plates can operate at different temperatures. Turn the knob clockwise to select the heating temperature
(from MIN to MAX). Use the lowest temperatures (MIN-3) for warming and simmering, and the highest temperatures
(4~MAX) for cooking and boiling.
The indicator light stays on while the hotplate is heating up. It goes out once the pre-set temperature has been
reached.
After use, turn the knob counter clockwise to the point "MIN" and unplug the hot plate from the electrical socket.
The construction of the hot plate means that a certain amount of residual will remain after it has been switched off,
and this can be used for keeping food warm over short periods.

Cleaning and Maintenance

Make sure that the appliance is unplugged from the mains and cold before attempting to clean it.
All surfaces can be wiped clean with a damp cloth. Do not use abrasive cleaning products that might damage the
hot plates. Never immerse the appliance in water or any other liquid.
Instructions for use
English
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hp-01s.014a

Table des Matières