How To Use - Varan VAR-CB-20 Manuel D'utilisation

FEATURES
Features:
• Suitable for 12/24V lead-acid batteries
• Light weight and portable ,easy to operate
• Reverse polarity protection
• Thermal and overload protection
• AMP meter to display charging rate and charging status
• Quick and slow settings for safe and reliable charging
• Heavy duty construction
• Idea for charging cars , ATV ,boats , tractors, etc

HOW TO USE

Before using:
1. Please make sure the input power cable is tightly connected to correct socket of source power
2. Please don't expose the machine in rain.
3. Please turn off power switch before any connection operation.
4. Please make sure the fuse is tightly connected.
• set the charging switch 12/24 according to the nominal voltage of the battery or motor
• Check the polarity of both clamps: Connect the red clamp to the positive terminal "+" of the battery
and the black clamp to the negative terminal "-". Connect the mains cable to the mains and set the
switch in "on" position.
WARNING:
1).It is important to select right voltage (12v or 24v) that fit the battery!
2).Change of any setting is prohibited while the charger is working!
3).Do not leave the charger on "MAX " setting over long periods of time .if using "MAX" setting,
please check the status of the charger at regular intervals. Failure to do so may damage the unit.
Varan Motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg T: 00352/26908036 – F: 00352/26908040
VAR-CB-20