Bresser TNS1 Mode D'emploi page 9

PARTS OVERVIEW
Adjustable
focus lens
Infrared thermal
image sensor
OPERATING
CHARGING
The product is provided with built-in battery.
When the battery power is not sufficient, please
charge it through Micro USB interface in time.
POWER ON/OFF
Hold down [ ] key to power on /off.
IMAGE CAPTURE
Press [ ] key to capture the image. The screen
will show [ ] prompt, indicating that image cap-
ture is successful.
IMAGE REVIEW
After powering on, short press the [
enter the image viewing mode (the image shows
Indicator light
switch
Mode switch
CVBS video output
interface
] key to
Dioptric
Zoom in /
adjustment knob
zoom out
Capture
USB interface
the last imagetaken), press the [
the previous image, press the [
next image, and press the [
viewing mode.
DELETE IMAGE
After entering the image viewing mode, press and
hold the [
image.
IMAGE EXPORT
Capture and save images can be viewed and ex-
ported via a Micro USB connection to a computer.
MODE SWITCHING
Press the [
imaging modes of rainbow, iron oxide red, white
heat and black heat.
9
Eyepiece patch
] key to exit Image
] key to delete the currently viewed
] button to switch between the four
EN
] key to view
] key to view the