Putting On The Headphones; Button Overview - Bresser BT-OEH1 Mode D'emploi

Putting on the headphones

The control panel with the buttons is lo-

cated on the left side of the headphones.
This tells you which way around to put the
headphones on.


Button overview


On/Off slide switch

 Multifunction button
 Increase volume
 Decrease volume
 Audio input

 Mini-USB 5V DC (Charge headset)
 LED Indicator light

 Microphone



12
On/Off slide switch
Button Press Function
Turning headphones on or off

1x
Pair headphones with Bluetooth device
When the headphones are turned on, a tone informs you of
the current mode. Activate Bluetooth in your device and then
start a Bluetooth search. Connect to the "BT-OEH1" device.
You will be notified by a tone that the connection was success-
ful. The headphones can now be operated with the connected
device. If you use this mode, you can receive or reject calls. If
there is no Bluetooth connection for a long time, the search will
stop and you will need to turn the headset off and on again.
Menu
Bluetooth on
Bluetooth off
Menu Available
Add device BT-OEH1