Flex FX1531 Manuel De L'utilisateur page 13

MODE SELECTOR (FIG. 10)
The operation of the gearbox for each
application is set with the mode selector. To
change among functions, slide and rotate the
selector to the desired operating mode.
Rotary Drilling Mode
Hammer Drilling Mode
Working Angle
Adjustment for Chisel
Bits
Hammering Mode
SETTING THE CHISEL POSITION (FIG. 11)
The chisel can be turned to a position that is
ideal for the work to be performed.
a. Move the mode selector to the symbol
b. Turn the chisel until it is at the required angle.
c. Move the mode selector to the symbol .
Make sure that it audibly clicks into place.
Fig. 10
Mode Selector
Fig. 11
b
.
-13-
a
c