Flex FX1531 Manuel De L'utilisateur page 12

WARNING
this product until the parts are replaced. Use
of this product with damaged or missing parts
could result in serious personal injury.
VARIABLE-SPEED TRIGGER SWITCH (FIG. 9)
Your tool is equipped with a variable-speed
trigger switch. The tool can be turned "ON" or
"OFF" by depressing or releasing the variable-
speed trigger switch.
The variable-speed trigger switch delivers
higher speed with increased trigger pressure
and lower speed with decreased trigger
pressure.
WARNING
serious personal injury, always remove the
battery pack from the tool when assembling
parts.
This rotary hammer must be used only with
the battery packs and chargers listed below:
2.5Ah 5Ah
FLEX FX0111 FLEX FX0121
NOTICE: Please refer to the battery pack and charger manuals for detailed operating
information.
OPERATING INSTRUCTIONS
If any parts are damaged
or missing, do not operate
To prevent accidental
starting that could cause
Battery Pack
8Ah
FLEX FX0221
Fig. 9
12Ah
FLEX FX0231
-12-
Variable-Speed Trigger
Switch
Charger
FLEX FX0411 FLEX FX0421