Hamilton Beach Commercial HCR330 Mode D'emploi page 11

Radio-réveil à affichage del
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating Instructions
SLEEP button until "OFF" appears in the display.
PRESET RADIO STATION
If the batteries were installed correctly, you can store the
tuning frequency of 20 radio stations in the memory, 10 for
each of the AM and FM waveband ranges, by following these
steps:
1. Search for and stay on one desired AM/FM radio station.
2. Press and hold (at least 2 seconds) the TIME/MEMORY button.
"P 01" or "P--" (previous setting) will flash on the display.
3. Press the HOUR/TUNE– or MIN/TUNE+ button to select the
preset station from P01 to P10.
4. Press the TIME/MEMORY button again before the display of
your chosen preset station "P--" stops flashing. The tuning
frequency will be stored as the corresponding "P--."
5. Follow steps 1–4 above to store desired stations as P01–P10.
6. If you want to play a preset station, just press the TIME/
MEMORY button during radio mode to select the preset
station P01–P10 that you want to listen to.
NOTE: If the TIME/MEMORY button is not pressed while the
display "P--" flashes 4 seconds (4 flashes) before stopping, the
station frequency has not been saved successfully into memory.
11
(cont.)

Publicité

Table des Matières
loading

Table des Matières