Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
UK
1
Adjusting the gain level
The AM6162L has an adjustable gain
control. You can adjust the gain level
depending on your signal strength. Use a
flat-headed screwdriver to adjust the gain.
2
Additional Features
Short circuit protection
For added safety the AM6162L has built-
in short circuit protection. Should a short
circuit be detected, the amplifier will shut
downin order to prevent any possible
damage. Should this occur, all outputs will
be switched off but the power LED will
remain lit.
TECHNICAL SPECIFICATIONS
Input
Output
Frequency Range
Max output level
Gain
Noise
Weight
Dimensions
1. Turn clockwise to increase the gain level
(max 16dB)
2. Turn anticlockwise to decrease the gain
level (min 0dB (no signal amplification))
To reset the system following a short
circuit, simply remove all outputs and
inputs, switch off the amplifier and remove
the power cable from its socket for approx
30 seconds.
You should then reconnect the amplifier
outputs one by one until you can fi nd
which output is causing the short circuit.
2 (UHF, VHF)
4
UHF 470-790 MHz / VHF 30-300 MHz
94 dBµV
0-12 dB
3.5dB
330 gr
178 x 85 x 40 mm
Publicité
Table des Matières
