Setting Up The Av Transmitter; Setting Up The Av Receiver - Marmitek Digital TV Anywhere Guide Utilisateur

SETTING UP THE AV TRANSMITTER

1. Connect the TRANSMITTER SCART cable to the AV jack at the
back of the AV transmitter [3].
2. Connect the SCART plug to the video (or audio) device you want
to broadcast (e.g. your digital TV decoder of satellite receiver).
3. Switch your ID code switch [2] (1-2-3-4) to 1.
4. Make sure the ON/OFF switch [6] is to the OFF position.
5. Connect the DC plug of the adapter to the DC jack, [1] at the
back of the AV Transmitter and connect the adapter to an outlet.
Only use the supplied power adapter!
6. Now push the ON/OFF switch [6]. The power LED [8] will go on.
7. Position the AV transmitter in a convenient location, preferably
free on all sides. If necessary, use the included stand. Make sure
the antenna [5] is placed vertical.

SETTING UP THE AV RECEIVER

1. Connect the RECEIVER SCART cable to the AV jack at the back of
the AV receiver [3].
2. Connect the SCART plug with the SCART input of the TV.
3. Switch your ID code switch [2] (1-2-3-4) to 1.
4. Make sure the ON/OFF switch [6] is to the OFF position.
5. Connect the DC plug of the adapter to the DC jack, [1] at the
back of the AV Receiver and connect the adapter to an outlet.
Only use the supplied power adapter!
6. Now push the ON/OFF switch [6]. The power LED [8] will go on.
7. Position the AV Receiver in a convenient location, preferably free
on all sides. If necessary, use the included stand. Make sure the
antenna [5] is placed vertical.
DIGITAL TV ANYWHERE
5