Fujitsu LIFEBOOK E752 Guide D'utilisation page 68

Have a charged battery ready to install.
1
Shut down your notebook and disconnect the AC adapter.
2
While pushing the battery lock away from the battery, slide the battery latch towards the center of the system.
3
Lift the battery out of the bay at the lift point.
Insert a new battery into the bay, and press it down so that the latches click into place.
4
Plug in the AC adapter and turn the power on.
5
Hot-swapping Batteries
To hot-swap batteries in your battery bay follow these easy steps:
B
E SURE TO PLUG IN AN
WHILE THE BATTERY IS BEING REPLACED
Plug an AC Adapter into the system and connect it to a power outlet.
1
While pushing the battery lock away from the battery, slide the battery latch towards the center of the system.
2
Lift the battery out of the bay at the lift point.
Insert a new battery into the bay, and press it down so that the latches click into place.
3
Turn the power on.
4
I L
F THE ITHIUM ION BATTERY CONNECTOR IS NOT FULLY SEATED
AC A
DAPTER PRIOR TO REMOVING THE BATTERY
. I
F YOU DO NOT USE AN
62 - Lithium ion Battery
. T
HERE IS NO BRIDGE BATTERY PRESENT TO SUPPORT THE SYSTEM
AC A
DAPTER YOU WILL LOSE ANY UNSAVED FILES
,
YOU MAY NOT BE ABLE TO USE YOUR NOTEBOOK OR CHARGE YOUR BATTERY
.
.