Jacques Seban CSJS Mode D'emploi page 19

EN
PROFESSIONAL TOWEL WARMER
4. Servicing
It is important to clean the unit at the end of each day to meet hygiene requirements
and optimise the unit's service life.
 Set the buttons to the "OFF" position
 Unplug the electrical lead from the mains power socket.
 Once the unit has cooled down, wipe the inside of the unit.
 Empty the water tray.
 Clean the inside of the unit with a dry towel. If necessary, clean the body of the
unit with a cloth slightly moistened with water or mild liquid soap. Never use
abrasive products or solvents.
 The towel tray can be washed with water once it has been taken out of the unit.
 Leave the door open for a short while to air the inside of the unit.
19