Using The Vacport; Troubleshooting; Cleaning And Caring For The Vacport - Dometic VACPORT Instructions De Montage Et De Service

VacPort
6

Using the VacPort

A
NOTICE!
Do not use the sweep inlet valve without a dust bag or motor filter in the
central vacuum cleaner.
➤ Connect the hose connector on the front of the central vacuum cleaner with the
sliding cover and the external hose socket when you clean up using the sweep
inlet valve, in order to avoid loss of suction.
➤ To switch on, slide the flap upward.
✓ The vacuum cleaner switches on automatically.
✓ The LEDs light up.
➤ Sweep the dust into the opening.
➤ To switch off, slide the flap downward.
✓ The vacuum cleaner switches off automatically.
✓ The LEDs go out.
7

Troubleshooting

I
NOTE
If the motor stops, switch off the vacuum cleaner. You can find notes on
troubleshooting in the installation and operating manual of the CV1004
or CV2004 central vacuum cleaner.
8

Cleaning and caring for the VacPort

A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning as these
may damage the product.
➤ Occasionally clean the product with a damp cloth.
EN
Using the VacPort
9