Power On And Off / Pairing The Device - Impecca HSB100 Manuel De L'utilisateur

POWER ON/POWER OFF
Power On/Off
To switch the device on, press and hold the multifunction button for about 5
seconds and then release.
Note: If the Bluetooth Wireless Stereo Headset has already been paired or
connected to another Bluetooth device before, the Blue LED light will slowly
flash as the headset automatically attempts to reconnect to the paired device.
If the headset is unable to locate a formerly paired device within 3 minutes, it
will shut down automatically.
To turn the power off, press and hold the multifunction button for about 5 seconds and then release. The
Red LED light will flash and then turn off.
When the headset is connected to a paired device and is ready for use, the indicator light slowly flashes
blue. If the headset has not been paired with a device, it automatically enters the pairing mode
If you connect the headset to a device but do not use it for a while, switch off the headset to save power.
PAIRING HEADSET WITH BLUETOOTH-ENABLED DEVICES
Pair and connect the headset with a mobile phone that has a music player feature
If your phone supports the A2DP Bluetooth profile and has a music player feature, you can use the
phone to make and receive calls and to play music with the headset.
1. Ensure that your phone is switched on.
2. If the headset has not been previously paired with a device, press and hold the multifunction
button for about 8 seconds until the Blue LED light flashes rapidly, indicating that the device is
in 'pairing' mode.
Note: If the headset has been previously paired with another device, switch off the headset
and press and hold the multifunction key for 5 seconds until the indicator light starts to flash
blue quickly.
3. Activate the Bluetooth feature on the phone, and set it to search for Bluetooth devices. See
the user guide of your phone for instructions.
4. Select the headset from the list of found devices. It should show up as "HSB100".
5. Enter the passcode " 0000 " to pair and connect the headset to your phone. In some phones,
you may need to make the connection separately after pairing. You only need to pair the
headset with your phone once.
If pairing is successful, the headset appears in the menu of the mobile phone where you can view the
currently paired Bluetooth devices. When the headset is connected with your mobile phone and ready
for use, the indicator light of the headset slowly flashes blue.
- 5 -