NORMAL OPERATION
(When not using the remote control)
Step 1:
The light switches off while solar
charging during the day
Step 3:
When PIR detector senses
movement, the light will switch to
50% mode (500 lumens)
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User's Manual—Read before using this equipment
©2017 Wagan Corporation. All Rights Reserved.
Step 2:
The light will turn on at dim
power mode (150 lumens) when
it is dark
Step 4:
The light will switch to dim power
mode again 30 seconds after
movement ceases
6