Care, Storing, Repair And Recycling - Henry Schein 900-8181 Manuel D'utilisation

12

CARE, STORING, REPAIR AND RECYCLING

1. Protect this device from high moisture, direct sunlight, shock,
solvent, alcohol and gasoline.
2. Remove batteries if device is stored for a long time, and keep the
batteries away from the children.
3. Keep cuff away from sharp objects and do not extend or twist the
cuff.
4. Clean device with soft or dry cloths only.
5. The cuff must be handled with care and the cover can be cleaned
with a damp cloth. WARNING: Do not wash the inner bladder.
6. The device should be checked yearly by specialists to ensure correct
operation. Please consult your dealer for more information.
7. Follw the local directive (WEE regulations)for disposal of batteries
and device.
TROUBLESHOOTING
SYMPTOM
No display when
the ON/OFF
button is pressed
Inflation stops and
re-inflate later
CHECKPOINT
• The batteries have
run down
The polarity of battery
is wrong
• The contact of bat-
tery compartment is
polluted
• The automatic infla-
tion for ensuring cor-
rect measurement
• Did you talk or move
your arm (or hand)
during measurement?
REMEDY
• The batteries have
run down
The polarity of battery
is wrong
• The contact of bat-
tery compartment is
polluted
• See "AUTOMATIC
INFLATION"
• Keep still and silent
during the measure-
ment