D-Link DU-520 Guide D'installation page 2

Check Your Package Contents
DO NOT insert the DU-520 into the computer's PCI
slot before installing the drivers from the D-Link CD.
Installing the DU-520 Drivers
A. Insert the driver CD, which is included with the DU-520, into the optical drive of your
computer.
B. Choose the preferred language and click on Install Drivers.
C. When prompted Finished, click OK. Or if prompted to reboot (under Windows 98SE only),
click Yes.
Installing the DU-520 into the computer's PCI slot
A. Remove the outer cover of your computer. Refer to your computer manual if needed.
Remove the backplate. (The small piece of metal that covers the opening for the PCI card).
B. Locate an available PCI slot and insert the DU-520 carefully into the PCI slot.
Quick Installation Guide
5-Port Hi-Speed USB 2.0 PCI Adapter
DU-520
Next, TURN OFF the computer and unplug
the power cord.
Caution: To avoid damage caused by static electricity, make sure to properly
ground yourself by first touching a metal part of your computer to discharge
any static electricity before working with the DU-520 Ethernet Adapter.
DU-520
CD with Manual and Drivers
1