Clean Air Optima AD-302 Mode D'emploi page 6

• Use soft tap water. The water line shall cover the water sensor and should remain below the
Max water level line.
• Drop a few drops of essential oil into the water. (See the table below).
Note: Please do not remove the Splash Board when adding water, to avoid that the amount of
water exceeds the MAX level.
Space
10m2-20m2
10m2-40m2
10m2-60m2
3. Connect to power supply
• Connect USB cord with any USB power source.
(Please make sure the power supply is 5V
• When the power is connected, the device flashes yellow once to indicate the power is
connected. The device is on standby now.
4. Mist function and light
6
Volume
50ml
100ml
130ml
Step 1
Light button
Drops suggestion
1-4 drops
3-6 drops
4-8 drops
Step 2
1A).
Spray button
Duration
0.5h-1h
1h-2h
2h-3h