BST Pro AMC-70 Manuel D'utilisation page 7

DESCRIPTION
16. LINE OUTPUT
Use this output to connect an external power amplifier
17. AUX INPUT
Used to connect a line level device such cd player, MP3 player,...
18. POWER LED
This led lights on when you switch the conference lectern on
19. AUX 1 LEVEL CONTROL
Use to adjust the level of the AUX Input
20. LOW TONE CONTROL
Use to adjust the low frequency tone level
21. TREBLE TONE CONTROL
Use to adjust the high frequency tone level
© Copyright LOTRONIC 2012
AMC-70
1. GOOSNECK MIC ( PROVIDED )
2. GOOSNECK LIGHT ( PROVIDED )
3. LECTERN
4. LIGHT POWER SWITCH
Use to switch the goosneck light on or off
5. MIC 1 LEVEL CONTROL
Use to adjust mic 1 level control
6. MIC 2 LEVEL CONTROL
Use to adjust mic 2 level control
7. MASTER LEVEL CONTROL
Use to adjust the main signal level control
8. MIC 2 INPUT
Connect a microphone on this input
9. MIC 1 INPUT
Connect a microphone on this socket
10. SPEAKER SELECTOR SWITCH
11. LEFT EXTERNAL SPEAKER CONNECTOR
12. RIGHT EXTERNAL SPEAKER CONNECTOR
13. BOTTOM
14. AC SOCKET
15. POWER SWITCH
Use to switch the conference lectern on or off
Page 7