Ring; Optional - Klauke ES 65-L Mode D'emploi

Instruction Manual Cutting Tool
ES 65-L
Index
1. Introduction
2. Warranty
3. Description of the electric-hydraulic
cutting unit
3.1 Description of the components
3.2 Brief description of the important features
of the unit
3.3 Description of the tool indication
4. Remarks in respect of the determined use
4.1 Operation of the units
4.2 Explanation of the application range
4.3 Service and Maintenance instructions
5. Troubleshooting
6. Technical data
7. Putting out of operation/waste disposal
Symbols
Safety warnings
Please do not disregard these instructions in or-
der to avoid human injuries and environmental
damages.
Operational warnings
Please do not disregard them to avoid dama-
ging the tool.
1. Introduction
Before starting to use the tool please read
the instruction manual carefully.
Use this tool exclusively for its determined use.
Cutting of conductors/cables with the help of this tool
must only be performed by specially trained personnel.
The minimum age is 16 years.
This instruction manual has to be carried along during the
entire life span of that tool.
The operator has
• to guarantee the availability of the instruction manual
for the user and
• to make sure, that the user has read and understood
the instruction manual.
2. Warranty
If the tool is operated according to its intended
use and the regular maintenance services are
observed our warranty is 24 months from the
time of delivery. Worn-out parts resulting from
its intended use are excluded. We reserve the
right to rework the tool in case of a justifi ed war-
ranty claim.
3. Description of the electric-hydrau-
lic cutting tool
3.1 Description of the components
The electric-hydraulic cutting unit is a hand guided tool
and consists of the following components:
HE.13461_B © 05/2010
Table 3 (see Picture 1)
Pos. Description Function
1 LED (red) Indicator for battery charge con-
trol, tool functions and faults
2 Battery rechargeable 3Ah Li-Ion
cartridge battery (RAL2/BL1830)

Optional:

mains adapter NG2230
3 Trigger Switch to start the cutting
procedure
4 Retract button Button to open the dies
in case of emergency
5 LED (white) to illuminate the working area
6 Handle Handle to guide the cutting head
7 Blades cutting blades for mild reinforced
copper and aluminium conduc-
tors and cables
8 Cutting head Solid 350° smoothly rotary sissors
type cutting head
9

Ring

Device to secure
the cutting tool
10 Housing Ergonomically formed plastic
housing in a 2-Component de-
sign for perfect handling
3.2 Brief description of the important
features of the unit
The hydraulic unit incorporates an automatic retrac-
tion which returns the piston into its starting position
when the maximum operating pressure is reached.
A manual retraction allows the user to return the pis-
ton into the starting position.
A manual retraction stop allows the user to stop the
retract at any position during the automatic retrac-
tion.
The unit is equipped with a special brake which
stops the forward motion of the blades when the
trigger is released.
The unit is equipped with a double piston pump
which is characterised by a rapid approach of the
dies towards the conductor/cable and a slow cutting
motion.
The cutting head can be smoothly turned by 350°
around the longitudinal axis in order to gain better
access to tight corners and other diffi cult working
areas.
The tool is equipped with a microprocessor which
indicates service intervals and low battery charges
and performs internal checks.
A white LED illuminates the working space after ac-
tivating the trigger. It automatically switches off 10
sec. after releasing the trigger. This feature can be
deactivated (see page III)
1
GB