Functional Description Of The App - Reer AngelGuard Mode D'emploi

7. Select „Code received" and enter the code shown on the
watch display.
Caution: Mobile data reception or use of WLAN of both SIM
cards (watch and smartphone) is a required prerequisite.
The watch is now connected to the app.
Important instructions for use: During use, the app must
not be disabled from the background process of the smart-
phone.

Functional description of the app

1. Positioning: The last
queried watch positi-
on is displayed on the map.
The current position can be
determined by clicking on the
location symbol:
The positioning accura-
cy (GPS, LBS, WiFi) de-
pends, among other things,
on your mobile provider and
their network coverage:
• GPS: The watch receives a
GPS signal from as many
satellites as possible so
that the position can be
determined with an accuracy of a few metres. Now, a circle
appears on the display. For this to happen, the watch must
be outdoors for at least 5 minutes.
• LBS: If the watch does not receive a sufficiently strong GPS
signal, it switches to LBS positioning (e. g. inside buildings or
in a car). The position is determined by means of the closest
cell tower and the accuracy drops to a few hundred metres.
24
1 2 3
4 5 6
9
7 8
• WiFi: The watch position is determined using the WLAN
networks within reception range.
2. Phone: this call function enables you to talk to your
child on the phone.
3. Destination entry: you can enter an address here, from
which you would like to receive a notification, as soon
as your child reaches it, e. g. kindergarten or school.
Please note: the positioning interval must be activated and
determined (see page 26).
4. History: from the date, the route taken by the child on
that day can be displayed on the map.
Please note: the positioning interval must be activated and
determined (see page 26).
5. Take off sensor: when the watch is taken off, a notifica-
tion is sent by the sensor to the app.
6. Messages: via „holding and speaking" you can send
voice messages to the watch.
Please note: the maximum length of a message is 12s.
7. Reminder: this function enables you to define
important times like e. g. kindergarten/school times
as well as times at home. The child is then reminded e. g. of
when it is time to go home, or you are notified, whether your
child has (or has not) reached school or home.
Please note: the positioning interval must be activated and
determined (see page 26).
8. Step counter: for counting the steps of the person
wearing the watch
25