Ec Declaration Of Conformity - Milwaukee M18 CHT Notice Originale

The product is designed for home or domestic use. It is
intended to cut and trim hedges, shrubs, and similar
vegetation.
It should be used in dry, well-illuminated conditions.
It is not intended to cut grass, trees, or branches. It should
not be used for any other purpose than hedge trimming.
Do not use this product in any other way as stated for
normal use.
EC-DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole
responsibility that the product described under "Technical
Data" fulfi lls all the relevant regulations and the directives
2011/65/EU (RoHS), 2014/30/EU, 2006/42/EC, and the
following harmonized standards have been used:
EN 60745-1:2009+A11:2010
EN 60745-2-15:2009+A1:2010
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN ISO 3744:2010
EN IEC 63000:2018
Measured sound power level: 91 dB(A)
Guaranteed sound power level: 93 dB(A).
Conformity assessment procedure according 2000/14/EC to
Annex V.
Winnenden, 2021-06-25
Alexander Krug
Managing Director
Authorized to compile the technical fi le.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
18 ENGLISH
GB-DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole
responsibility that the product described under "Technical
Data" fulfi lls all the relevant provisions of the following
Regulations S.I. 2008/1597 (as amended), S.I. 2016/1091
(as amended), S.I. 2012/3032 (as amended) and that the
following designated standards have been used:
BS EN 60745-1:2009+A11:2010
BS EN 60745-2-15:2009+A1:2010
BS EN IEC 55014-1:2021
BS EN IEC 55014-2:2021
BS EN ISO 3744:2010
BS EN IEC 63000:2018
Measured sound power level: 91 dB(A)
Guaranteed sound power level: 93 dB(A).
Conformity assessment procedure according to
S.I.2001/1701 Schedule 8
Winnenden, 2021-06-25
Alexander Krug
Managing Director
Authorized to compile the technical fi le.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
BATTERIES
Battery packs which have not been used for some time
should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the
performance of the battery pack. Avoid extended exposure
to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept
clean.
For an optimum life-time, after use, the battery packs have
to be fully charged.
To obtain the longest possible battery life remove the battery
pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C
and away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
MAINTENANCE
After each use, clean the body and handles of the product
with a soft, dry cloth.
After each use, clean the debris from the blades with a stiff
brush, and then carefully apply a rust preventative lubricant
before refi ttingthe blade protector. The manufacturer
recommends you to use a rust preventative and lubricant
spray to apply an even distribution and reduce the risk of
personal injury from contact with the blades. For information
about suitable spray product, please contact one of our
Milwaukee service agents (see our list of guarantee/service
addresses).
You may wish to lubricate the blades lightly before use if
necessary using the above method.
Keep all nuts, bolts and screws tight to be sure that the
machine is in safe working condition.
Examine the machine and replace worn or damaged parts
for safety.
Use only Milwaukee accessories and Milwaukee spare
parts. Should components need to be replaced which have
not been described, please contact one of our Milwaukee
service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the machine type printed as well as the six-digit
No. on the label and order the drawing at your local service
agents or directly at: Techtronic Industries GmbH,
Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
CAUTION! WARNING! DANGER!
Please read the instructions carefully before
starting the machine.
Remove the battery pack before starting any
work on the machine.
Always wear goggles when using the machine.
Wear ear protectors!
Wear non-slip, heavy duty gloves
Keep bystanders a safe distance away from the
machine.
Always hold the hedge trimmer with both hands
when operating.
To prevent serious injury, do not touch cutting
blades.
Do not use in the rain or leave outdoors while it is
raining.
The guaranteed sound power level is 93 dB.
Volts
Direct Current
No Load Strokes per Minute (SPM)
Do not dispose electric tools, batteries/
rechargeable batteries together with household
waste material.
Electric tools and batteries that have reached the
end of their life must be collected separately and
returned to an environmentally compatible
recycling facility.
Check with your local authority or retailer for
recycling advice and collection point.
European Conformity Mark
British Confomity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
ENGLISH 19