General Safety Requirements; Disposal And Recycling - Prem-I-Air EH1636 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Press Button F to adjust the low, medium and high mist settings. We recommend you use the low mist
F) Mist emission setting
setting for night-time use. The selected setting is displayed by the bars on either side of the humidity
level (see diagram below)
Low mist setting
At time of going to press, the average cost of electricity is £0.13 per unit (kilowatt-hour). The amount
you are being charged will be shown on your electricity bill. At this cost, the EH1636 will cost 9.4p per
day to run in cool mist mode and 31.2p per day in warm mist mode.
When used in an office environment, we recommend that this product should be safety-tested yearly by
a qualified electrician (PAT Tested).
We recommend that it is PAT tested regularly when used in a domestic environment.
Domestic wiring must be tested periodically by a qualified electrician at least once every 10 years or at
every change of occupancy.
For office and retail premises, and buildings such as village halls, the wiring must be inspected at least
once every 5 years.
It is recommended that all building be fitted with smoke alarms (it is mandatory for new buildings).
You must not dispose of this appliance with domestic household waste.
Most local authorities have specific collection system for appliances and disposal is free of charge to
the end-user.
When replacing an existing appliance with a similar new appliance your retailer may take the old
appliance for disposal.
OPERATING INSTRUCTIONS
Medium mist setting
OPERATING COSTS
PAT TESTING

GENERAL SAFETY REQUIREMENTS

DISPOSAL AND RECYCLING

4
High mist setting
Ver 07 2016

Publicité

Table des Matières
loading

Table des Matières