Magnat MC 100 Mode D'emploi page 19

OPERATIONAL ELEMENTS AND CONNECTIONS - REMOTE CONTROL
10 TONE/BAL
TREBLE (TONE pressed once):
The treble setting may be ramped either up or
down in 7 steps. Use the ▲and▼ buttons to
adjust the value.
BASS (TONE pressed twice):
Bass playback may be ramped either up or
down in 7 steps. Use the ▲and▼ buttons to
adjust the value.
BALANCE:
The stereo balance may be adjusted either to the
right or left in 10 steps. Use the ◄ ◄ and ► ►
buttons to adjust the value.
11 LOUDNESS
Selection of the Loudness function (aurally
compensated volume correction).
12 PLAY/PAUSE/SELECT
CD mode:
Starts or pauses the playback from a CD.
Menu:
Confirm the entry.
13 STOP
Stops a CD that is playing.
14 CD CONTROL: PROGRAM/RANDOM/
REPEAT
PROGRAM
Programming tracks on a CD in a particular
order.
The Stop mode must be activated to programme
tracks.
• Press the PROG button.
Display: PRG 01-00
• Now assign the desired track to memory
location 01 by selecting the track number via
the numeric keypad or the SKIP button.
Display e.g.: PRG 01-08
• Press the PROG button again.
Display: PRG 02-00
• Now enter the desired track for memory
location 02.
• Repeat these steps until all of the desired
tracks have been programmed. After the last
title, press the STOP button. The number of
programmed titles and the total playing time
of the programme list are displayed.
• Start playing the programmed list by pressing
PLAY. A "P" appears to the left of the display,
followed by the current track and elapsed
time.
Display e.g.: P 08-00: 0 7
• You can manipulate playback within the
programmed list by pressing SKIP, SEARCH
and PAUSE/PLAY.
• The programme is erased after pressing the
STOP or EJECT button.
RANDOM
Plays the titles of a CD in random order.
• Press once: The function is deactivated.
The following appears in the display:
RANdOM-ON
• Press again: The function is activated.
The following appears in the display:
RANdOM-OFF
REPEAT
Track/CD repeat playback (repeat function):
• Press once: The current track is repeated.
The following appears in the display:
REPEAT ONE
• Press twice: The entire CD is repeated.
The following appears in the display:
REPEAT ALL
• Press again: The repeat function is
deactivated. The following appears in the
display:
REPEAT OFF
15 DIM
This button can be used to adjust the brightness
of the display (3 levels).
16 DISCONNECT (BLUETOOTH OPERATION)
Closes an existing Bluetooth connection and
starts the pairing mode.
17 ST/MONO (in FM mode only)
Switches between FM-Stereo and FM-Mono for
FM stations.
In stereo mode, the system will automatically
19
switch to mono reception when the signal is weak
in order to improve signal-to-noise ratios.
Stereo reception is indicated by the ‚ST.' Symbol
in the display.
18 AUTO (DAB MODE)
This function scans the DAB frequency range
(band III) for stations. These can then be
accesses via the TUNING buttons.
19 EJECT
Opens the CD compartment.