Declaration Of Conformity - Beta 1932B10 Notice D'utilisation Et Instructions

EN I
OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO
If lubrication is not provided to the line, oil ISO 32 must be periodically poured into the pneumatic tool, through the air supply hole
(picture 5-g).
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel.
For such jobs, you can contact Beta Utensili S.P.A.'s repair centre.
DISPOSAL
The pneumatic tool, accessories and packaging should be sent to a waste disposal centre, in accordance with the laws in force
in your country.
WARRANTY
This tool is manufactured and tested in accordance with current EU regulations, and is covered by a 12-month warranty
for professional use or a 24-month warranty for nonprofessional use.
We will repair any breakdowns caused by material or manufacturing defects by fixing the defective pieces or replacing them
at our discretion.
Should assistance be required once or several times during the warranty period, the expiry date of this warranty
will remain unchanged.
This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or falls. In addition,
this warranty will no longer be valid if any changes are made, or if the pneumatic tool is forced or sent to the customer
service in pieces.
This warranty explicitly excludes any damage to people and/or things, whether direct or consequential.
___________________________________________________________________________________________________


DECLARATION OF CONFORMITY

We hereby declare, assuming full responsibility, that the described product complies with all the relevant provisions of
Machine Directive 2006/42/EC and amendments thereto, as well as with the following standard:
• EN ISO 11148-3
The Technical Brochure is available at:
BETA UTENSILI S.P.A.
Via A. Volta 18
20845 Sovico (MB)
ITALY
12