Direction For Use - Carmen Advance Satin Set 2-in-1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
6 • ENGLISH
first time. A red LED will light up on the
charger to indicate that the appliance is
being charged. When charging is finished
the light will light up green.
• Clean the device after every use!
• Do not use any lotions that contain
alcohol either immediately before or after
shaving.
• To avoid any possible skin irritations do not
press the foil too hard against the skin.
• Only charge the rechargeable battery
when it is almost empty. This will
prevent premature wear and tear of the
rechargeable battery. Do not leave the
charger plugged in all the time.
> DIRECTION FOR USE
1. Before beginning, thoroughly wash
the areas of the body to be shaved, to
remove any traces of personal care
products (e.g. deodorant) and dry the
skin with a towel. According to the device
design and type the device can be used
wet and dry.
2. First choose the head of reference. The
lady shaver or the epilator and remove
the protective cover.
3. Press the safety lock button and slide up
the on/off/2 setting speed button to turn
the device on, select speed 1 or 2 (1: fine
hair/2: coarse hair). When pressing the
silver button the speed accelerates.
4. Dry shaving : When dry shaving, make
sure that the skin is washed thoroughly
and is absolutely dry. Use the switch to
turn on the device. Pull your skin taut
using your free hand to make the hairs
lift up. To use in the armpit area stretch
your arm up over your head Guide the
lady shaver smoothly and without undue
pressure over the skin so that both the

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ls170

Table des Matières