Before The First Use - Domo DO8125 Mode D'emploi

· All repairs should be carried out by the manufacturer or its aftersales service.
· Never immerse the appliance, the cord or the plug in water or any other liquid.
· Make sure that children do not touch the cord or appliance.
· Keep the cord away from sharp edges and hot parts or other heat sources.
· Before use, remove all packaging materials and any promotional stickers.
· Do not insert any objects into the fan, as this may cause electric shock, injuries or damage
to the appliance. Do not block or tamper with the fan when it is operating.
· Do not use this fan in any wet or humid areas. Do not place the fan too close to a bath tub
or any other water container.
PARTS
1. Air outlet
2. Air inlet
3. Base
4. Control panel
5. Timer
6. Reset button (RESET)
7. Speed control (HIGH-MID-LOW)
8. Oscillation (SWING)

BEFORE THE FIRST USE

By following these steps, you can attach the base of the appliance:
1. Feed the electric lead through the central opening in the back
(A) of the base.
2. Place the front side of the base (B) on the back of the base.
3. Slide the whole thing onto the appliance and fasten the base
with the accompanying screw plug.
USE
· To turn the appliance on, set the timer to ON and set the desired speed. HIGH is the
highest speed, LOW the lowest and MID is in between.
· To reset the speed, press the RESET button. Then you can choose another speed.
· To switch the appliance off, turn the knob to OFF.
· TIMER: You can set the time for a time period between 1 and 120 minutes. To set the time,
turn the knob clockwise to the desired time. When the set time has passed, the appliance
will stop working.
Caution: never turn the timer counter-clockwise from ON to 120 min.
20
DO8125
4
2
1
3
A
5
7
8
6
B