Control Panel - Oceanic OCEAVB100W1 Guide D'utilisation

Control panel

*Insert plug to the electrical outlet, and the indicator light turns on.
"OFF": Turn off the appliance.
"ON/SPEED"
: Turn on the appliance and choose the Low, Medium, High fan speed
that matches the light on the control panel.
"MODE": to choose the wind type from one of following:
- "Normal"
: Wind flow based on Low/Med/High speed.
- "Natural"
: Imitates the flow of natural wind based on strong and soft wind.
- "Sleep"
: The fan runs for half an hour on strong then soft natural wind mode, then
change to soft natural wind for the next half hour, and then the fan turns off automatically.
"SWING"
: press this button to start oscillation; press again to fix the airflow direction.
"HUMIDITY"
: Humidifying function. The mist comes out of the front plate if there is
water in the tank. The MIST function can be used on its own or along with the fan function
to blow the mist into the room.
"MOSQUITO REPELLER"
: Mosquito repellent function. You need to insert a esters
mosquitocide tablet (size 22x34.8mm) into the repeller mouth, take it out after 10-15
hours operation and replace a new tablet. The tablet is not included with the product.
Below two functions only can be activated on remote control:
"ANION"
: to start the purifier air function; press again to close the function.
"TIMER"
: Timer setting (0.5~7.5 hours). There are 4 indicator lights for automatic
timing. To set a timer of 7.5 hours, you need to press 15 times and all the 4 timer indicator
lights light up.
Les deux fonctions ci-dessous ne peuvent être activées que sur la télécommande :
« ANION » : pour lancer la fonction de purification de l'air ; appuyez à nouveau sur ce
bouton pour désactiver la fonction.
« TIMER (MINUTERIE) » : Réglage de la minuterie (0,5~7,5 heures). Il y a 4 voyants
lumineux pour la minuterie automatique. Pour régler une minuterie de 7,5 heures, vous devez
appuyer 15 fois sur le bouton et les 4 voyants lumineux de la minuterie s'allument.