Operation Mode Overview - Goobay AVS 45 HDMI Matrix 4in/2out Notice D'utilisation

Manual
• Push it again for 2 seconds to restart the AVS 45.
• Selecting the source device: If you would like to choose the input channel manually, push
the SELECT/POWER button again for 1 second. A green LED will flash on to identify the
active channel.
• Use the RESET button on the remote control to set the AVS 45 into initial condition.
Resetting
This action is a circular function.
When you have choosed a channel, the dedicated LED flashes on.
E.g. Select channel 1 – LED CH1 flashes on.

5.5 Operation Mode Overview:

Starting Mode
Output A &
Output B
-
adjusted to use
one source
device together
-
Splitter Mode
Output A &
Output B
-
adjusted to use
several source
devices
-
Matrix Mode
14
supported
- The source device automati-
cally adjusts to a audio- and
video format, supported by all
connected devices. The
output device with the highest
compatibility to the source
device will be adjusted as
primal device.
(mode of the highest common
accordance)
- You can also adjust the
audio-/video signal manually.
Please make sure, the output
devices support these
adjustments.
- The source device automati-
cally adjusts to a audio- and
video format, supported by the
output devices.
(output A or output B)
- You can also adjust the
audio-/video signal manually.
Please make sure, the output
devices support these
adjustments.
Not supported
- The audio-/video format of the
source device must be adjusted
first.
- Please make sure, the output
devices support these adjust-
ments.
(e.g.You want the source device
sending a 1080p video signal,
although the output device only
supportd up to 720p or 1080i.
Then no picture will be shown.)
- The audio-/video format of the
source device must be adjusted
first.
- Please make sure, the output
devices support these adjust-
ments.