Introduction; Safety Measures And Warnings - FireWare Phoenix Silkflame Mode D'emploi Utilisateurs

User Manual
EN
FireWare Phoenix Silkflame
1.

Introduction

Congratulations on the purchase of your FireWare Phoenix Silkflame!
The Fireware Phoenix Silkflame is especially designed to quickly simulate a flame. The appliance is
made for training purposes and therefore also needs to be used as such.
!
2. Safety measures & warnings
When using this appliance closely follow the instructions and guidelines, as described in
this manual. Never change the order of the acts to be performed. In case anything
concerning the use is not clear please contact FireWare.
Only adults who are informed about the content of this user manual should use this
appliance. May only be used by experts in a professional exercise situation.
This is a practice appliance. Use this appliance only what it is designed for.
This electrical appliance is designed to be used INDOORS.
Only use the appliance in plugs with an earth connection, maximum 220-240 Volt.
The location of the appliance needs to be:
• dry.
• between 5 °C and 40 °C.
• have a humidity of less than 80%.
• free of explosive gasses.
Make sure that the appliance and the wires can be placed in a safe location so that no
one can slip, trip or fall over it. Tape the wires to the floor if necessary.
Never let the power-cord come into contact with other cables. Handle the power-cord and
all connec tions with the mains with particular caution.
Never remove warning or informative labels from the unit.
NEVER open the appliance. This can cause electric shocks and will cancel any kind of
warranty.
www.FireWare.nl
Prior to using it you should read this user manual thoroughly,
in order for you to be fully informed about the use, working and
the characteristics of the FireWare Phoenix Silkflame
FireWare Phoenix Silkflame
Afbeelding 2
07