Fenix A691493 Manuel D'utilisation page 12

COMFORT TEMPERATURE SETTING:
Using the + and – button, you can increase or decrease the set
temperature by steps of 1°C.
You can set your own desired temperature.
Close the doors of the room and wait several hours until the
temperature stabilizes at the desired value.
If the set temperature does not suit you, increase or decrease the
value by steps of 1 °C.
Wait again a few hours to check the comfort temperature value.
Advise: We suggest you a reference temperature of 19 ° C.
Signals through
Displayed symbols Operation
the programmer
STOP
Heating stops instantly
ECONOMY (Set
Set back of 3,5° C below the
back)
comfort temperature
ANTI-FROST Holds temperature at ~7° C to
avoid frost damage
ECONOMY OVERRIDE FACILITY:
For short-term absence (more than 2 hours), this mode helps you to
save energy and heating costs. This economic position will decrease
the room temperature by 3.5° C compared to the chose n comfort
temperature setting. To do this:
Press the MODE button until the display shows you the position "EC"
(see picture).
It is possible to check the Economic setting by briefly pressing one of the two buttons + or -.
To change the "EC" temperature: press for 3 seconds on MODE and "EC" flashes.
The modification is possible using the + or - buttons.
Press the MODE button to validate.
« ANTI-FROST » MODE:
For long-term absence (more than 24 hours), this mode helps to
maintain the room temperature at about 7°C. This en sures maximum
savings without taking the risk of irreversible freezing damages.
To do this:
Press the MODE button until the display shows the position "HG"
(hors-gel i.e. Anti-Frost in French).
HOW TO LOCK THE CONTROL BOX:
You have chosen, for example, the Economy mode, press the + and
- buttons simultaneously for approximately 3 seconds.
12