Optoma W415 Notice D'emploi page 80

Annexes
N N
ote ote
Ce projecteur est
pleinement conforme
aux spécifications de
JBMIA PJLink™ Class
1. Il prend en charge
toutes les commandes
définies par PJLink™
Class 1, et la
conformité a été vérifiée
avec les spécifications
de la norme PJLink™
Version 1.0.
80
Command Description
INPT? Inquiry about input
switching
AVMT Mute control
AVMT? Inquiry about the
mute state
ERST? Inquiry about the error
state
LAMP? Inquiry about the lamp
state
INST? Inquiry about the
available inputs
NAME? Inquiry about the
projector name
INF1? Inquiry about the
manufacturer name
Remark (Parameter)
12 = VGA2
13 = Component
14 = BNC
21 = VIDEO
22 = S-VIDEO
31 = HDMI 1
32 = HDMI 2
30 = Video and audio mute disable
31 = Video and audio mute enable
1st byte: Fan error, 0 or 2
2nd byte: Lamp error, 0 to 2
3rd byte: Temperature error, 0 or 2
4th byte: Cover open error, 0 or 2
5th byte: Filter error, 0 or 2
6th byte: Other error, 0 or 2
0 to 2 mean as follows:
0 = No error detected, 1 = Warning,
2 = Error
1st value (1 to 5 digits):
Cumulative LAMP operating
time (This item shows a lamp
operating time (hour) calculated
based on that LAMP MODE is
LOW.)
2nd value: 0 = Lamp off, 1 =
Lamp on
The following value is returned.
"11 12 21 22 31 32"
The projector name set on
the NETWORK menu or the
ProjectorView
Setup window is returned
"Optoma" is returned.