Maintenance; Self Clean - Samsung WF45K6500A Série Mode D'emploi

Maintenance

Keep the washer clean to prevent its performance from deteriorating and to preserve its
life cycle.

Self Clean+

Perform this cycle regularly to clean the drum and to remove bacteria from it.
1. Make sure the drum is empty.
2. Press Power to turn on the washer.
3. Press Self Clean+.
4. Press Start/Pause.
NOTE
- The water temperature for Self Clean+ is set to EXTRA HOT, which cannot be
changed. (only for WF45K6500A* model)
- The water temperature for Self Clean+ is set to HOT, which cannot be changed. (only
for WF45K6200A* model)
CAUTION
Do not use any cleaning agents. Do not add detergent or bleach. Chemical residue in the
drum degrades the cleaning performance.
Self Clean+ reminder (
• The Self Clean+ reminder appears on the main screen once every 40 washes. It is
advisable to perform the Self Clean+ regularly.
• If you do not run the cycle within 1 hour when the Self Clean+ reminder appears, the
reminder turns off automatically.
• When you first see this reminder, you can ignore the reminder for 6 consecutive
washes. From the 7
on the second 40
WF45K6500AV_DC68-03665A-02_EN.indd 49
)
wash, the reminder no longer appears. However, it appears again
th
wash.
th
English 49
2016/8/12 14:38:10