Activation; Battery Change; Reset; Characteristics - JRI Maxant Spy RF Alarm 06255D Notice D'utilisation

c)

Activation

To start the SPY RF, press between 3 and 10" on the button:
- the 2 LEDs are on and flash at the same time
- The green led blinks evry seconds
To stop the Spy RF, press on between 3 to 10'' on the button
- the 2 leds are on and and flash one after the other.
Stop is possible only if there is no alarm, otherwise acknowledge it before with Sirius.
V. BATTERY CHANGE
1
Never unscrew.
This will cancel
the warranty
KEEP THE BATERY FAR FROM THE FIRE ; DO NOT TRY TO RELOAD OR TO SHORT CIRCUIT IT. USE ONLY BATTERIES
SUPPLIED BY JRI (REF 06569)
VI. RESET
If the device does not work anymore (cannot turn it on...), use the Reset function in the same way as the battery change.
VII. CHARACTERISTICS
Duration alarm on
Duration alarm off
Operating range
Storage range
Radio range (in free field)
Radio band
Power supply
battery life
Dimensions
Protction degree
CE ERM conformity
FCC conformity
* Supplied for the european market
©JRI Maxant
>3'' / <10''
2
1
3
2
Open the
battery cover
a
a) Unplug the battery connector.
b) Short circuit the 2 pins with a screwdriver
c) Connect the new battery
d) Change the seal
e) Close the battery cover
Suitable
Suitable
-10°C +70°C
-40 + 85°C
1km
868MHz or 902MHz
9 VDC – 300 mA*
200 alarms or 2years
123x69x30mm
IP34
EN 301 489 / EN 61000 / EN 61010 EN 55022 / EN 300 220
3
b
FCC part 15
12