Cleaning And Maintenance - Bluesky BMG900ESL23 Manuel D'utilisation

Switch off the oven and disconnect the supply lead before cleaning.
Ensure that the inside of the oven remains clean. When spatters adhere to the wall, wipe with a wet
rag. If the oven is very dirty, you can use a non-corrosive detergent. Avoid using sprays or
corrosive cleaners, they would risk staining, scratching or tarnishing the inside of your oven.
Use a wet rag to clean the outside of the oven. To avoid any damage to the functioning elements
placed inside the oven, be particularly attentive not to allow any infiltrations of water through the
aeration openings.
Clean the spatters inside and outside the oven pane by means of a wet rag.
Avoid the control panel getting wet. Clean with a soft and damp rag. During the cleaning of this
control panel, leave the door of the oven open to avoid any accidental operation.
If vapour forms inside or outside the oven, clean by means of a soft rag. This can occur when the
oven works in a very humid environment. This reaction is completely normal.
Remove occasionally the revolving tray to clean it. Use warm soapy water or put it in the dishwasher.
The tray support and the bottom of the oven must be cleaned regularly to avoid a troublesome noise.
Only use a non-corrosive cleaner. The support can be cleaned with warm soapy water or in the
dishwasher. Then ensure that it is replaced correctly.
To eliminate smells from your oven, mix a cup of water with the juice and skin of a lemon in a large
bowl and heat it all up during 5 minutes in the microwave. Clean carefully and wipe with a soft
rag.
If the oven lamp has to be replaced, please contact the reseller.
C L E A N I N G A N
C L E A N I N G A N
D M A I N T E N A N
D M A I N T E N A N
C E
C E