Care Instructions - shark Press & Refresh GS500CN Guide D'utilisation

Assembly of the Vertical Press Pad
Assembly & use instructions:
IMPORTANT: Always make
sure the garment steamer is
UNPLUGGED from the electrical
outlet when not in use. Never
fill the water reservoir when the
unit is plugged in.
1 R emove contents of the Press &
Refresh Garment Care System
™
and lay them out on a flat
surface to see that you have all
the components to complete
the assembly.
2 R EAD ALL INSTRUCTIONS
BEFORE USING YOUR PRESS
& REFRESH GARMENT CARE
™
SYSTEM.
GS500CN_IB_EF_100813.indd 9
Fig. 1
Fig. 2
Assembling the vertical
press pad:
3
I nsert the garment hook into
the opening at the top of the
vertical press pad (Fig. 1).
Secure the rod into the garment
hook on either side of the pad
making sure they are inserted
firmly (Fig. 2). The support
rods come assembled in the
pad.
4
T he Vertical Press Pad comes
asembled with heat protection
panels in the pockets on the
back. These panels protect
your door from heat damage
and should be in place at all
times during use.
The straps can be adjusted
to fit any door using the
buckle to adjust the strap
lengths.
Fig. 3
5
A ttach the vertical press pad to
any door. With the door open,
loop the straps at the top of
the vertical press pad around
the corner of the door and
repeat on the opposite side.
Gently tug on the pad to make
sure it is secure and shut the
door completely to ensure the
pad is stable for pressing. Be
careful not to close the door on
your fingers. Adjust the straps
to the appropriate height for
comfort (Fig. 3).

Care instructions:

6 R emove the 8 heat protection
panels from the back of the
pad and remove the garment
hook and rods. Machine wash
in warm water with liquid
detergent and lay flat to dry.
Do not use bleach or fabric
softener.
www.sharkclean.com
10-08-13 8:55 AM
English
9