Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ADEUNIS RF AMBIENT SENSOR - USER GUIDE - V1.1.1
3. Mounting and Start up
Adeunis RF Ambient Sensor is delivered in "Park mode" (display OFF). In this mode the device is inactive, ready to start, with very low battery
consumption. Unless a customized setting is asked, the device settings by default are:
•
Display switch OFF
•
Wireless M-Bus T1 mode, with telegram transmission every 4mn
•
AES128 encryption desactived
3.1. Mounting accessories
The Ambient sensor comes with an aluminum plate. This plate can be fixed on any
type of support (wall, divider...) using screws or clamps. Once the plate is installed,
just come positioning the temperature sensor and snap it.
3.2. Plastic Seal
Plastic seal to be armed once the Ambient Sensor is assembled on the aluminium
plate. It allows the product to start and leave the «Park mode».
1st step
Fixing the holder
2nd step
Mount the Ambient Sensor device on the
holder starting from up side.
Last step
Complete the assembly by pushing the seal
until it locks.
Page
13
of 16
Publicité
Table des Matières
