Publicité
Les langues disponibles
Les langues disponibles
2/ To disconnect the cable and microphone, grasp the connector while depressing the tab. Pull the
connector away from the microphone. Phantom power must be turned off when connecting and
disconnecting the microphone.
3/ Switch A « Low cut » (l
•
Position "- ": no atténuation.
•
Position "┌": reduces the proximity effect while reducing the lowest frequencies (often used when
picking up vocals).
4/ Switch B « -10dB » (
•
Position "0": no attenuation.
•
Position "-10dB": 10dB sensitivity reduction (generally used when recording sounds at high volumes).
5/ Polarity switch:
∞
•
Position
: bidirectionnal. Allows localized capture on the front and rear of the cell.
•
Position
: cardioid. Allows localized capture on the front of the cell.
•
O
Position
: omnidirectionnal. Allows capture from all directions around the cell.
A
Cautions:
1/ If the head of the microphone is covered by hand or brought close to the speaker, howling sound may be
generated. To prevent this, first decrease the volume, then place the microphone so that it is not pointed to
the speaker and that there is a sufficient distance between the microphone and speaker.
2 / To maintain the quality and sensitivity of the microphone, do not expose it to dust or high temperatures.
3 / Due to the high sensitivity of the cell, take care not to drop your microphone and to avoid any shock to it.
4 / To maintain the sensitivity and quality of sound reproduction, avoid exposing your microphone to humidity
and extreme temperatures.
Illustrations et photos non contractuelles
Actual product(s) may differ from illustrations/photographs used
Copyright © 2020 IPE Music/Prodipe
ow frequency attenuation
):
sensitivity attenuation
B
):
C
Page 8
Publicité
