Power Amplifier Hookups - Sony TA-P9000ES Mode D'emploi

Power Amplifier Hookups

Connect the rear, center, and front input jacks on your five
channel power amplifier (Sony TA-N9000ES etc.) to the
pre amplifier's PRE OUT jacks. For details, see the
operating instructions supplied with your power
amplifier.
Connect a powered sub woofer to either of the PRE OUT
WOOFER jacks. The same signal is output from both PRE
OUT WOOFER jacks.
S-LINK
CTRL A1 REAR CENTER
R L
INPUT 1
FRONT REAR CENTER FRONT
L L
R R
WOOFER
6 GB
FRONT SPEAKERS
+ –
R
( + )
BTL
( – )
+ –
R
REAR SPEAKERS
INPUT OPERATION
FRONT EXTRA 2CH
NORMAL
R L R L
INPUT 2 BYPASS 5.1ch BYPASS 2ch
REAR CENTER FRONT REAR CENTER
L L
R R
WOOFER WOOFER
Required cords
Audio cords (3 cords are supplied)
When connecting a cord, be sure to match the color-coded pins to
the appropriate jacks on the components.
White (L)
Red (R)
Monaural audio cords (not supplied)
For the PRE OUT CENTER and PRE OUT WOOFER jacks.
Black
z When making woofer and center channel connections
You can use one set of pins (e.g., red) on the audio cord (not
supplied) to connect the CENTER jacks and the other set (e.g.,
white) to connect the WOOFER jacks.
– +
L
( + )
BTL
( – )
– + –
L
CENTER SPEAKER
BTL
PRE OUT
FRONT REAR CENTER
L
R
WOOFER TO POWER AMP
White (L)
Red (R)
Black
TA-N9000ES etc.
Make sure to power off
when switching
NORMAL BTL
USE USE
NORMAL BTL
USE USE
4Ω MIN 8Ω MIN
8Ω MIN 16Ω MIN
+
SPEAKER IMPEDANCE
TA-P9000ES
CTRL A1
Active Woofer
INPUT
AUDIO
IN