Location Of Parts And Basic Operations; Front Panel Parts Description - Sony TA-P9000ES Mode D'emploi

Location of
Parts and Basic
Operations
This chapter provides information
about the locations and functions of
the buttons and controls on the front
panel and the various jacks on the
rear panel. It also explains basic
operations.
10 GB
Front Panel Parts
Description
1 U switch
Press to turn the pre amplifier on and off.
• Before you turn on the pre amplifier, make sure that you
have turned the MASTER VOLUME control to the leftmost
position to avoid damaging your speakers.
STANDBY indicator
Lights when the pre amplifier is turned off (standby
mode) using the supplied remote. Blinks momentarily
after U is pressed to turn the unit on, then goes out to
indicate that the unit is ready.
2 Input indicators
Light to indicate the current input.
3 INPUT SELECTOR control
Turn to select the input you want to use.
To select
INPUT 1
INPUT 2
BYPASS 5.1ch
BYPASS 2ch
After selecting the input, turn on the component(s)
connected to the input you selected and play the
program source.
* The audio signal input to the BYPASS 5.1ch jacks is output
from the PRE OUT jacks even when this unit's power is
turned off.
Turn to light
1
2
BYPASS 5.1ch*
BYPASS 2ch