Télécharger Imprimer la page

EINHELL 45.016.90 Mode D'emploi D'origine page 16

Perche élaguese
Masquer les pouces Voir aussi pour 45.016.90:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
Anleitung_GE_EC_720_T_SPK7__ 15.02.2018 07:54 Seite 16
GB
Packaging:
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled.
When using the equipment, a few safety
precautions must be observed to avoid injuries
and damage.
Read the operating instructions carefully and
n
comply with them. It is important to consult these
instructions in order to acquaint yourself with the
equipment, its proper use and the important
safety regulations.
Keep this manual in a safe place so that the
n
information is available at all times.
If you give the equipment to any other person,
n
give them these operating instructions as well.
We can accept no liability for damage or
accidents which arise due to non-compliance
with these instructions.
1. General safety regulations
Please refer to the booklet included in delivery for the
safety information.
m
CAUTION
Read all the safety information and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
This equipment is not designed to be used by people
(including children) with limited physical, sensory or
mental capacities or those with no experience and/or
knowledge. Children must always be supervised in
order to ensure that they do not play with the
equipment.
16
2. Layout and items supplied
1. Safety guard
2. On/Off switch
3. Safety lock-off
4. Power cable
5. Carrying strap with safety release
6. Holding area
7. Telescopic tube lock
8. Additional handle
9. Connecting piece
10. Top telescopic tube with motor housing
11. Cutter bar
12. Saw chain
13. Cutter guard
Additional items delivered for the GE-EC 720 T
Kit:
14. Telescopic tube extension
15. Hip holder with pouch
3. Intended use
The chainsaw with telescopic handle is designed for
lopping off tree branches. The equipment is not
suitable for extensive sawing work, felling trees or
sawing any materials other than wood.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.

Publicité

loading

Ce manuel est également adapté pour:

1101245.016.8011025Ge-ec 720 tGe-ec 720 t kit