Velleman CAMB27 Mode D'emploi page 4

4. Operation
Refer to the illustrations on page 2 of this manual.
1. To fully extend the tripod, pull out the bottom section of the legs.
2. Lock the legs in place. Turn the bottom section of each leg to the right.
The legs should now be locked for extra stability.
3. Proceed in reverse order to close the tripod.
5. Cleaning and Maintenance
Occasionally wipe with a damp cloth to keep it looking new. Do not use
harsh chemicals, cleaning solvents or strong detergents.
6. Technical Specifications
dimensions folded .............................................. 280 x 50 mm
weight ......................................................................... 390 g
max. load ..................................................................... 1 kg
tube diameter ............................................................ 15 mm
tube sections ...................................................................... 8
adjustable height .............................................. 280-1004 mm
colour ......................................................................... black
camera thread ............................................................ 1/4-20
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting from
(incorrect) use of this device. For more info concerning this product
and the latest version of this manual, please visit our website
www.velleman.eu. The information in this manual is subject to
change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 01 – 22/08/2016
CAMB27
4 ©Velleman nv