Philips Elance 3100 Serie Mode D'emploi page 7

All manuals and user guides at all-guides.com
Drip stop
Types GC3135, GC3130, GC3126, GC3125, GC3120, GC3121,
B
GC3115.
This iron is equipped with a drip-stop function: the iron automatically
stops producing steam when the temperature is too low to prevent
water from dripping out of the soleplate.When this happens you may
hear a sound.
Automatic anti-calc system
Types GC3135, GC3130, GC3126, GC3125, GC3120, GC3121,
B
GC3117, GC3116.
C
1 The built-in anti-calc system reduces the build-up of scale and
guarantees a longer life for the iron.
Electronic safety shut-off function
Type GC3135 only.
B
C
The electronic safety shut-off function automatically switches off
the iron if it has not been moved for a while.
The red auto-off pilot light starts blinking to indicate that the iron
has been switched off by the safety shut-off function.
To let the iron heat up again:
- Pick up the iron or move it slightly.
- The red auto-off pilot light goes out. If the temperature of the
soleplate has dropped below the set ironing temperature, the amber
temperature pilot light goes on.
- If the amber pilot light goes on after you have moved the iron, wait
for it to go out before you start ironing.
- If the amber pilot light does not go on after you move the iron, the
soleplate still has the right temperature and the iron is ready for use.
Cleaning and maintenance
After ironing
1 Remove the mains plug from the wall socket and let the iron
cool down.
2 Wipe flakes and any other deposits off the soleplate with a
damp cloth and a non-abrasive (liquid) cleaning agent.
ENGLISH
7