SilverCrest SND 4600 A1 Mode D'emploi page 14

Handling and use
Inserting negatives
♦ Unlock the catch on the front of the negative holder
open the holder.
♦ Lay the negative in the negative holder
Ensure that holes of the negative strip are placed on the corre-
sponding retaining tabs on the holder, so that the negative strip
can not move.
♦ Close the negative holder
♦ Now insert the negative holder
the front and visible into the slot
♦ Push the negative holder
into the first position. For additional negatives, push the negative
5
holder
Figure 1
│ GB │ IE
■ 10
5
further in until it audibly clicks into the next position.
5
5
so that the lid is firmly shut.
5
with the triangle marking at
4
on the right (see figure 1).
4
into the slot
Figure 2
5
and
the right way up.
until it audibly clicks
SND 4600 A1