Télécharger Imprimer la page

Black & Decker BDCD8 Instructions Originales page 9

Masquer les pouces Voir aussi pour BDCD8:

Publicité

Les langues disponibles

Les langues disponibles

• Always hold the tool and screwdriver bit
in a straight line with the screw
Troubleshooting
Problem
Possible cause
Unit will not
Battery pack not
start.
charged.
Battery pack
Charger not
will not charge.
plugged in.
Surrounding air
temperature too
hot or too cold.
Maintenance
Your BLACK+DECKER tool has been
designed to operate over a long period of
time with a minimum of maintenance.
Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Your charger does not require any
maintenance apart from regular cleaning.
Warning! Before performing any
maintenance on the tool, remove the
battery from the tool. Unplug the charger
before cleaning it.
• Regularly clean the ventilation slots in
your tool and charger using a soft brush
or dry cloth.
• Regularly clean the motor housing using
a damp cloth. Do not use any abrasive or
solvent-based cleaner.
• Regularly open the chuck and tap it to
remove any dust from the interior.
Batteries
There are no user servicable parts
inside.
• At the end of your products life return
the whole unit to your service agent or
to a local recycling station to have the
battery recycled. Do not throw the unit
out with household waste.
All manuals and user guides at all-guides.com
(Original instructions)
Technical data
Voltage
Possible solution
No-load speed
Check battery pack
Max. torque
charging requirements
Chuck capacity
Plug charger into a
working outlet.
Max Drilling capacity
Move charger and
Steel/wood
battery pack to a
surrounding air
Weight
temperature of above
40 degrees F (45ºC)
Charger
or below 105 degrees
F (+40.5ºC)
Input voltage
Output voltage
Current
Approx. charge time
Battery
Voltage
Capacity
Type
Level of sound pressure according to EN 60745:
Sound pressure (L
Sound power (L
Vibration total values (triax vector sum)
according to EN 60745:
Drilling into metal (a
uncertainty (K) 1.5 m/s
Screwdriving without impact (a
uncertainty (K) 1.5 m/s
ENGLISH
V
DC
Min
-1
Nm
mm
mm
NA/20mm
kg
V
AC
V
DC
mA
Hours
V
AC
Ah
) 60.7 dB(A), uncertainty (K) 3 dB(A)
pA
) 71.7 dB(A), uncertainty (K) 3 dB(A)
WA
)0.837 m/s
h, D
2
) 0.837 m/s
h
2
BDCD8
7.2
400
8/12
1-10
0.62
230
5
600
8
7.2
1.5
Li-Ion
2
,
2
,
9

Publicité

loading