Publicité
Les langues disponibles
Les langues disponibles
en-CA
Problem solving guide
Many malfunctions and errors that can occur in daily operation can be easily
remedied. You can save time and money in many cases, as you do not need to
contact Miele Customer Service.
Information to help you rectify malfunctions yourself can be found at
www.miele.com/service.
The following tables are designed to help you to find the cause of a malfunction or
an error and to resolve it.
Risk of injury caused by rotating roller brush.
You can injure yourself on the rotating roller brush.
Switch the vacuum cleaner off before dealing with any problems. Use the On/
Off switch on the Comfort handle to do this.
Problem
The cleaning
performance is poor.
Cleaning performance
is reduced.
The roller brush is not
rotating.
68
Possible cause and solution
The dust container is full.
Empty and clean the dust container (see
"Maintenance").
The Electrobrush is dirty / blocked.
Clean the Electrobrush (see "Maintenance" –
"Cleaning the Electrobrush" and "Removing the
roller brush from the Electrobrush").
The fine dust filter / pre-filter is soiled.
Run the interim cleaning function for the fine dust
filter (see "Maintenance" – "Activating the
ComfortClean function").
Clean both filters thoroughly (see "Maintenance" –
"Cleaning the pre-filter and fine dust filter").
The fine dust filter is worn.
Insert a new fine dust filter (HX FSF-2).
The roller brush is dirty.
Clean the roller brush (see "Maintenance" –
"Cleaning the Electrobrush" and "Removing the
roller brush from the Electrobrush").
Publicité
