Philips AZ 1008 Mode D'emploi page 12

CD-Player
Programming track numbers
You may store up to 19 tracks in the
desired sequence. If you like, store any track
more than once.
1 In the STOP mode, press PROGRAM to
activate program mode.
00 and
PROGRAM
2 Press SEARCH ∞ or § for your desired
track.
Your selected track number and
flashes.
PROGRAM
3 Press PROGRAM to store the track.
00 and
PROGRAM
next track selection.
4 Repeat steps 2 to 3 to select and store all
desired tracks in this way.
-- and
PROGRAM
if you attempt to program more than 19
tracks.
5 To play your program, press
PLAY•PAUSE 2;.
Reviewing your program
• In the stop position, press PROGRAM
repeatedly to see your stored track
numbers.
12
All manuals and user guides at all-guides.com
.
IC BA SS
D B B
flashes.
flashes, ready for your
flashes in the display
Cassette Recorder
Erasing a program
You can erase the contents of the memory
by:
– opening the CD door;
– selecting AM, FM or TAPE sound
source;
– pressing STOP 9 (twice during playback
or once in the stop position.)
Display: PROGRAM disappears.
CASSETTE RECORDER
Cassette playback
1 Adjust the source selector to TAPE/
2 Press STOP•OPEN 9/ to open the
cassette door and insert a recorded
cassette.
3 Close the cassette door.
4 Press PLAY 1 to start playback.
5 To pause playback press PAUSE ;.To
resume, press the key again.
6 By pressing SEARCH 5 or 6, fast
winding of the tape is possible in both
directions.To stop fast winding, press
STOP•OPEN 9/.
7 To stop the tape, press STOP•OPEN 9/.
• The keys are automatically released at the
end of the tape, and the set is switched off,
except if PAUSE ; has been activated.
.
OFF
.
IC BA SS
D B B